Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage. Feed the linkage back into the overflow hole and let the weight fall freely.
Tools You’ll Need to Unclog a Drain The first tool to reach for when trouble arises is a plunger. This plumber’s friend clears clogs from most fixtures, including sinks, tubs and toilets. Every homeowner should keep one handy.
If your drain fitting has these crossbars, insert a drain wrench into the cross shape and turn counterclockwise to unscrew it. (There are two ends to the wrench; use the side that offers the best fit.) You can also try using a pair of needle-nose pliers to grip the X and unscrew the drain fitting.
If you have a clogged pipe, a drain snake is a simple and cheap tool you can use to fix it. These are advertised as devices that anyone can use to unclog a drain. But if used improperly, drain augers could make the clog worse. You could jam the obstruction in there tighter, or worse, do damage to your pipes.
Insert the tip of the snake into the hole usually covered by the overflow plate. Crank the handle and extend about 30 inches of snake cable into the pipe. Continue to crank the handle, and press the snake forward and down into the drain. Crank and press until you feel the snake meet the obstruction.
Most bathroom drain clogs result when dirt, skin flakes, and especially hair binds to soap scum on the walls of drain pipes. Over time, this gunk accumulates and reduces water flow. Troubleshooting: Remove and clean the drain stopper. … If that doesn’t work, remove the drain elbow joint and clean it out.
For the toughest of clogs, a plumber may use a hydro jet. This tool sends pressured water through pipes to break down drain build-up. This tool is often faster and more efficient than a typical drain snake. Hydro jets get rid of the clog, but they’re also effective for cleaning drains.
If you have drains in your home that are clogged, releasing an awful scent, or cant unclog with a plunger, it is time to contact your local plumber. Plungers are often effective in clearing your drains, but if not you will need the help of a plumber to clear your drain line.
Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
Drains can quickly become clogged with soap, hair, grease, and other substances. If you don’t remove the clog quickly, it will worsen with time — leading to serious and expensive damage in your plumbing.
Mix together 1 cup of vinegar (distilled white vinegar works best) and 1 cup of baking soda. First, pour boiling water down the drain to loosen; then follow with the baking soda-vinegar mixture and wait 15 minutes. Rinse with more boiling water.
They work by a connection between the drain stopper and a lever via a rod mechanism hidden behind the bathtub. When the lever is up, the stopper is held in place, keeping your tub filled with water. When the lever is moved down, the stopper lifts and the tub drains.
Baking Soda and Vinegar Drain Unplug Remedy
Take one cup of baking soda, one cup of vinegar and one of salt, if you want some extra power, and make sure there’s no water in the tub. Dump the baking soda into the drain, followed by the salt, and finally the vinegar.
Pour 1/2 cup of baking soda into the clogged drain. Follow that with 1 cup of vinegar. Baking soda and vinegar dissolve grease and oil. Let the clogged drain sit undisturbed for 15 minutes.
bathtub drain won’t unscrew
how to remove old tub drain without crossbars
how to remove tub stopper pop-up
how to remove drain stopper
bathtub drain stopper stuck
bathtub drain flange
replace tub drain and overflow
old bathtub drain replacement