When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.
To open the valve manually, twist the manual bleed screw counter-clockwise until the valve opens. It usually doesn’t need to be more than one-half turn. To close the valve turn the manual bleed screw clockwise until the valve closes.
Do what it takes to free up that tiny screw in the center of the head. Turn the tiny screw in the center head counter-clockwise with a screwdriver until it feels tight, which generally will take between a quarter and a half turn. … When turning the screw to shut off the sprinkler head, don’t turn the screw too tight.
Make sure the sprinkler valve is closed, unless it’s the valve farthest from the main water source. You’ll want to leave this valve open and remove the sprinkler nozzle to allow air to escape when you turn on the water.
To keep your irrigation investment safe, monitor the weather and wait until temperatures consistently remain above freezing through the night. Typically, the best time to start up your sprinkler system is between the middle of April and the middle of May.
Opening your sprinkler system for the season will depend on the weather conditions and your individual watering needs. As a general rule, the system should not be opened until the threat of frost is passed. If you are an early planter, we recommend waiting to open your system until after April 15.
Turning it to the left lifts an internal gate that releases water incrementally as it turns. The gate lifts entirely when the handle is turned fully counterclockwise. If the handle will turn no farther counterclockwise, the valve is open.
Avoid over-turning the solenoid in either direction, as this can cause damage to the components or cause pressurised water to escape the solenoid. When you hear water rush through the device, it’s easy to tell that the valve has opened successfully.
If your irrigation system does not turn off, you need to isolate the problem. This starts by checking the main water line and the controller. If those are working, then you need to locate the valves and check to see whether they are dirty, the diaphragm is torn, or the solenoid is broken.
noun A form of socket-wrench having a T-head, or other shape resembling the winding-key of a clock, which fits the squared or prismatic shape on the end of a valve spindle. It is designed for use where the valve should not be opened or shut except by one duly authorized and possessing such a key or wrench.
These are the valves that turn on and off the sprinklers, they also may be used for drip irrigation systems. Other names sometime used for them are irrigation valve, sprinkler valve, solenoid valve, and lawn valve. Sometimes they are incorrectly called Garden Valves.
Turn Off Water System – Before beginning your installation it is so important to make sure that your water system is shut off properly. If you don’t get your water shut off before the installation process you will have water spraying everywhere.
Air Trapped in the Valve:
The valves may have air trapped in them. A small bubble of air becomes trapped in the tiny water ports of the valve, this stops the water from flowing through the port. Since the water flowing through the port is what holds the valve diaphragm closed, the valve stays open.
Related Searches
how to turn on sprinkler system manually
how to turn on sprinkler system video
how to turn on sprinkler system in spring
how to turn on sprinkler system rain bird
how to turn off sprinkler system
sprinkler turn on tool
how to turn on sprinkler system with backflow preventer
how to turn on sprinkler system hunter